Modification of the customer premises wiring, before the installation of Cytavision service

In the case of existing Analog Telephony Service (PSTN)

In case there are several telephone outlets (sockets) on the telephone line where the ADSL modem will be connected, special filters will be provided by Cyta to be installed between the sockets and telephones.

Figure 1 shows the final wiring, after Cytavision service is installed by the Cyta's technical team.

Figure 1 New customer premises wiring after installation of Cytavision

In the case of Digital Telephony Service (ISDN)

Figure 2 shows the wiring after the installation of Cytavision service by the Cyta's technical team in the presence of ISDN network termination.

Figure 2 Customer premises wiring after Cytavision is installed over an ISDN line

Cyta's technical team will draw, using the existing internal telephone pipes or externally (using tracking), a twisted pair cable. This should end up to the room where the ADSL modem will be installed, in the TV room.